In the process of operating the biomass/wood pellet machine,it is necessary to maintain the pellet machine regularly to make the wood pellet machine work normally.It is also necessary to protect and maintain the power system of the wood pellet machine so as to avoid the occurrence of fault and ensure the smooth operation of the motor.How should the biomass pellet machine motor be maintained?

1.Frequently tidy up the oil and dust on the motor.If the application environment is bad and the dust is relatively large,it is recommended that we regularly tidy the motor every few days to ensure the smooth leaning and work of the motor.
2.Check the transmission parts of the coupling to see if the coupling is damaged.The damaged coupling will cause many dangers and be replaced in time to effectively avoid many accidents.
3.Check the fixed screws position to see if they are loose.If loose,stop working,staff tighten them in time to avoid accidents.
4.Bearings should be sorted out in time after a period of time.Replacing lubricating grease and mechanical oil,and the frequency of sorting and replacement should be decided with the working time of the motor.The general replacement frequency is that the motor should be sorted out and replaced about half a year after working.
When we use the biomass/wood pellet machine,we must maintain its motor,because the motor is the driving force of the power system,once damaged,the equipment will not be operated,so it is necessary to master some methods of maintaining the granulator motor.